Fur cleaning method
Fur cannot be washed by hand or dry cleaned. It is usually coated and sprayed with alcohol, talc powder, magnesium oxide powder, etc., and should be treated according to different types of fur.
1. Clean ordinary fur of sheepskin.
Ingredients: 95% alcohol: 200% 26mdash; 250ml; talc: 500% 26mdash; 1000g. Washing method: Put the fur on the portrait air mold, use an air spray gun to uniformly atomize the alcohol solvent on the quilt, apply the quilt repeatedly with sponge dipped in powder, and rub it gently with a light rub and knead. Use a brush to clean the quilt powder, then use an air spray gun to clean the powder, and use a dilute comb to unclog the quilt in the direction.
2. Mink Fur Cleaning Materials: Magnesium oxide powder, talc powder, ratio 1:1. Washing method: Spread the fur flat on the washing table, apply the quilt evenly with sponge dipped in powder, apply the quilt repeatedly, let it sit for 24 hours, use a brush to clean the quilt powder, then put the fur on the portrait air mold, clean the powder with an air spray gun, and use a dense toothed comb to unclog the quilt in the direction.
3. White plush yellowing treatment.
Washing solution: hydrogen peroxide, water ratio 1:10. Washing method: Put the fur on the portrait air mold, use an air spray gun to atomize the solution evenly on the quilt, wet it thoroughly for 5 minutes, use a short-haired brush to dip the solution and gently brush it from top to bottom, and finally use a clean water spray gun to rinse and dry it in a ventilated and cool place, and unclog the quilt in the direction.
4. Light plush gloss and dull treatment.
Washing solution: acetic acid (white) or glacial acetic acid, water, ratio 1:1 or 1:2. Washing method: Put the fur on the portrait air mold, use an air spray gun to atomize the solution evenly on the fur, atomize it every 5 minutes, repeat 3— 5 times, preferably the fur is fully wet and water mist, let it stand for 15 minutes, then wipe and clean it with a dry sponge from top to bottom, and place it in a ventilated and cool place to dry. The chemicals used in the above methods are common items, such as salt, alum, and vinegar essence. Cleaning the above methods can clean the fur clothing. However, experts still remind everyone to pay attention to maintenance of valuable items. Everyone should take the fur clothing to a special cleaning shop as much as possible, which will help the life of fur clothing.
How to wash rabbit fur
Rabbit fur is relatively delicate, what should I do if the rabbit fur is dirty? Is there any way to clean rabbit fur at home? Here are a few methods for cleaning fur. If it is just a small range of cleaning, you can also try the following methods! Because the surface of rabbit hair fiber is composed of many scales, once it is stirred by a washing machine, it will be felted, destroying excellent performance and affecting the beauty. Therefore, it cannot be washed with a washing machine. It is best to dry clean, or it can be taken down and washed by hand.
1. Rice flour cleaning method
First, dry the rabbit fur thoroughly. This does not mean exposure to the sun, as exposure to the sun will cause the fur to discolor. Then pat off the excess dust, spray evenly with a watering can, and sprinkle millet flour evenly. Remember not to spray too wet, the millet flour will stick. Then rub the fur with your hands until the root of the fur, then shake off the millet flour, and then hang it to dry.
2. Scrub method
Prepare a white towel, a basin of warm water, soak the towel, wring it dry, first wipe it from the bottom to the head along the direction of the fur, wipe it from the bottom to the bottom, and when you see the towel is dusty, rinse the towel, and then wipe it. Usually, wipe it once every two or three days, and then let the fur be placed in a cool place and air-dry it.
3. Daily stain cleaning method:
(1) Dip the rabbit fur with beer, sake, and whiskey: Dip the cotton swabs in clean water and pat the dirty area, then use a dry cloth to suck out the moisture, and then use a brush to dip the neutral detergent to brush.
(2) Dip the rabbit fur with soy sauce and sauce: Dip the cotton swab or cloth clean water and pat the dirty area, then dip the cotton swab with neutral dishwashing liquid and continue patting until the stain is removed.
(3) Dip the rabbit fur with coffee, green tea, and red tea: dip the cotton swabs into clean water and pat the dirty areas, then use the cotton swabs to dip them in neutral dishwashing liquid or disinfectant alcohol, and wipe them again.
(4) Dip the rabbit fur with juice and wine: dip it with a cotton swab or cloth to disinfect alcohol and then pat the dirty area, and then bleach with bleach suitable for the fabric.
4. Clean talc powder. Spray some gasoline on the fur, then sprinkle some talc powder. Remember to be even, and then shake off the talc powder. The dirt will be taken away with the talc powder. However, this method may have a taste, but at least it will not harm the fur itself, which is much better than washing.
How to wash white fur? White fur is more likely to be dirty. In addition, in daily life, you should pay attention to the problem that white fur is prone to yellowing. So how to wash white fur? You can use some talc or gasoline to clean the white fur and use a brush to brush it back under the fur, so that the dust and dirt on the fur will be easily cleaned up.
Assuming that the white fur is a little yellow, you can pour two cups of water and add a spoonful of hydrogen peroxide to a certain proportion of the solution. Use an air spray gun to spray the solution evenly on the bristles, dip the bristles with a short hair brush dip the solution from top to bottom, and finally rinse the bristles with a clean water spray gun, place it in a ventilated and cool place to dry, and unclog the bristles in the direction. This way the fur will turn white.
Suppose that the area of oil is accidentally dipped on the fur, you can first use hot water to warm the fur dipped in oil, then use some clean cotton dipped in excess gasoline and wipe it back and forth on the oily area, and finally clean a piece with warm water and dry it.
Fur maintenance method
Maintenance note 1: Cool hanging method
When hanging fur, use a hanger with shoulder pads to cool the fur. Do not use a wire hanger to avoid damage or deformation of the fur.
Maintenance Note 2: Anti-humidity and heat
The enemy of fur is sunshine and moisture. Therefore, when storing and maintaining fur, avoid direct sunlight and stuffy and humid places..
Maintenance Note 3: Avoid chemicals
When wearing and maintaining fur, try not to spray perfume or hair spray, because the chemicals of these products contain alcohol, which will dry the fur.
Maintenance Note 4: Keep breathable
When storing and maintaining fur, you must ensure high breathability. Do not use plastic bags. If necessary, you can use a wide cloth bag to cover the fur to separate the dust.
Maintenance Note 5: Accidental wet treatment
If you accidentally wet the fur on a rainy day, do not intend to use a hair dryer to dry, because the fur cannot be heated. Just hang the wet fur in a dry place and let it dry naturally.